KLISON 高溫複合鋰基極壓 EP 0-1
克力森高溫複合鋰基極壓潤滑脂
KLISON LITHIUM COMPLEX EP GREASE
Lithium Complex EP Grease 是一種優質的高溫複合鋰基極壓潤滑脂.Lithium Complex EP Grease 能在高低溫.高負荷.震蕩負載具有震動的情況下很好的保護汽車業.工業.建築業和礦業.船舶業中各種軸承件.適用溫度可高達2450C.
優點/用途
•適用溫度高達2450C.
•能在各種軸承轉速下使用.
•超強的防腐蝕與抗鏽能力.
•在高負荷.震蕩負荷及震動的情況下保護機件免於摩耗.
•防水沖刷及乳化能力優異.
•在潮濕環境下延長使用壽命.
典型物性
測試項目
測試方法
測 試 結 果
NLGI Grade
# 0
# 1
增稠劑類型
Lithium Complex
Lithium Complex
顏色
Dark Green
Dark Green
紋理
Smooth
Smooth
滴點, 0C
ASTM D-2265
270
290
針入度 @ 250C
ASTM D-217
355-385
310-340
負載Timken ok load, PSI
ASTM D-2509
40-45
45-50
水沖刷試驗
ASTM D-1264
PASS
PASS
防腐蝕試驗
ASTM D-1743
PASS
PASS
技術規格
Meets U.K Timken Standard.
*本公司保留修訂產品一般特性的權利.讓顧客享受最新指令要求之權利*
KLISON LITHIUM COMPLEX EP GREASE
Product description :
Lithium Complex EP Grease is premium lithium complex, extreme pressure, high-temperature grease. It is suitable for high load, shock load and vibration applications in variety of automotive, industrial, construction, mining and marine applications. It has excellent performance properties at both high and low temperatures. It is particularly suited for applications such as bearings and ball and steering joints where moisture or condensation excellent performance properties at both high and low temperatures.
Benefits / Applications :
•Provide a high dropping point
•Suitable for wide range of bearing speed.
•Extra protection against rust and corrosion.
•Reduced wear under heavy or shock load and vibrations.
•Excellent resistance to water washout and contamination.
•Extended life in wet environments.
Typical Characteristics:
TEST DESCRIPTION
METHOD
TYPICAL RESULTS
NLGI Grade
# 0
# 1
Thickener Type
Lithium Complex
Lithium Complex
Colour
Dark Green
Dark Green
Texture
Smooth
Smooth
Dropping Point, 0C
ASTM D-2265
270
290
Worked Penetration @ 250C
ASTM D-217
355-385
310-340
Timken ok load, PSI
ASTM D-2509
40-45
45-50
Water Wash-out
ASTM D-1264
PASS
PASS
Rust and Corrosion Test
ASTM D-1743
PASS
PASS
Performance Standards:
Meets U.K Timken Standard.
*We remain the right to modify this specification to satisfy request of the clients for the evolution of the newest science & technology.
相關產品
-
KLISON 高溫複合鋰基極壓滑脂EP2-3
克力森高溫複合鋰基極壓滑脂 KLISON LITHIUM COMPLEX EP GREASE 產品說明 高溫複合鋰基極壓潤滑脂是一種優質的高溫複合鋰基極壓潤滑脂.Lithium Complex EP Grease 能在高低溫.高負荷.震蕩負載具有震動的情況下很好的保護汽車業.工業.建築業和礦業.船舶業中各種軸承件.適用溫度可高達2450C. 優點/用途 •適用溫度高達2450C. •能在各種軸承轉速下使用. •超強的防腐蝕與抗鏽能力. •在高負荷.震蕩負荷及震動的情況下保護機件免於摩耗. •防水沖刷及乳化能力優異. •在潮濕環境下延長使用壽命. 典型物性 測試項目 測試方法 測 試 結 果 NLGI Grade # 2 # 3 增稠劑類型 Lithium Complex Lithium Complex 顏色 Light Yellow Light Yellow 紋理 Smooth Smooth 滴點, 0C ASTM D-2265 260 285 針入度 @ 250C ASTM D-217 265 - 295 220 - 250 負載Timken ok load, PSI ASTM D-2509 45-55 45-55 水沖刷試驗 ASTM D-1264 PASS PASS 防腐蝕試驗 ASTM D-1743 PASS PASS 技術規格 Meets U.K Timken Standard. *本公司保留修訂產品一般特性的權利.讓顧客享受最新指令要求之權益 KLISON LITHIUM COMPLEX EP GREASE Product description : Lithium Complex EP Grease is premium lithium complex, extreme pressure, high-temperature grease. It is suitable for high load, shock load and vibration applications in variety of automotive, industrial, construction, mining and marine applications. It has excellent performance properties at both high and low temperatures. It is particularly suited for applications such as bearings and ball and steering joints where moisture or condensation excellent performance properties at both high and low temperatures. Benefits / Applications : •Provide a high dropping point •Suitable for wide range of bearing speed. •Extra protection against rust and corrosion. •Reduced wear under heavy or shock load and vibrations. •Excellent resistance to water washout and contamination. •Extended life in wet environments. Typical Characteristics: TEST DESCRIPTION METHOD TYPICAL RESULTS NLGI Grade # 2 # 3 Thickener Type Lithium Complex Lithium Complex Colour Light Yellow Light Yellow Texture Smooth Smooth Dropping Point, 0C ASTM D-2265 260 285 Worked Penetration @ 250C ASTM D-217 265 - 295 220 - 250 Timken ok load, PSI ASTM D-2509 45-55 45-55 Water Wash-out ASTM D-1264 PASS PASS Rust and Corrosion Test ASTM D-1743 PASS PASS Performance Standards: Meets U.K Timken Standard. *We remain the right to modify this specification to satisfy request of the clients for the evolution of the newest science & technology.
-
KLISON高溫硫鉬滑脂
克力森高溫硫鉬滑脂 KLISON HI –TEMP MOLY GREASE •Premium rolling-contact bearing grease. •Supenior lubrication under heavy or shock loading. •Muti-purpose applications,including sealed-for-live bearings. •Long live,high temperature,salt water rust inhibited. •最高級滾動式軸承滑脂。 •耐重負荷與耐震動負荷。 •多效用途,包括永不換油式軸承。 •長壽,耐高溫,含耐鹽水防鏽劑。 克力森高溫硫鉬滑脂系極壓型複合鋰皂基含高單位的硫鉬滑脂,具有抗氧化抗高溫,耐壓減磨之特性,在設計上操作溫度下,可長期使用,並適合機件在重負荷,高溫及嚴重的震動作業下潤滑。 克力森高溫硫鉬滑脂具有超強的潤滑界面親和性,有效的抑制金屬表面異常的磨損,及滑動面所產生的異常聲音,其優良的減磨特性,對於微動及震動的軸承特別有效,在任何機件潤滑工作上都能有效的降低摩擦係數與防止磨損。 克力森高溫硫鉬滑脂在高溫150℃使用時能有優越的效果,其潤滑年限,較一般滑脂要長十倍,本滑脂雖然滴點高達300℃及超溫下有優越的抗氧化及抗軟化性能,然溫度增加總會影響到氧化率及熱變質性,往往在溫度越高時,即需經常更換滑脂,例如溫度在200℃下使用不超過一星期為佳,如溫度接近250℃應每日補充滑脂。 specification nlgi grade no. 2 color grey-black soap type lithium complex dropping point ℃ 330 timken ok load,lbs >60 mineral oil viscosity cst 100℃ 20 COPPER CORROSION100℃,24HRS 1A WATER RESISTANCE % <3.3 MOLYBDENUM DISULFIDE,% 5 *本公司保留修訂產品一般特性的權利.讓顧客享受最新指令要求之權益*
-
KLISON 工業極壓齒輪油 GL-3
克力森工業極壓齒輪油 GL-3 KLISON INDUSTRIAL GEAR OIL GL-3 產品說明 克力森工業極壓齒輪油 GL-3是一個應用廣泛的極壓齒輪潤滑系列.具有優良的高溫氧化穩定性和極佳的低溫流動性.能快速的與水分離可防止油的乳化變質.特殊極壓添加劑.能全面保護齒輪免於鏽蝕和磨損.此外.在震盪負荷和高負載的情況下仍能提供很好的齒輪表面保護. 克力森工業極壓齒輪油 GL-3幾乎能應用於所有工業齒輪系統.例如鋼鐵廠.玻璃廠等生產線中所使用的齒輪組及循環系統.還有注塑機器.造紙設備.電機.地下礦業.水泥窯及石化生產設備. 優點/用途 •高低溫表現優異,防鏽抗腐. •超越美國US STEEL 224號,德國DIN51517第三部分,美國齒輪協會AGMA9005-D94等技術標準. •保護工業齒輪齒面免於擦傷,灼傷和壓傷. 典型物性 测量项目 测量方法 测量结果 SAE 粘度等级 90 140 比重 @ 15 ºC ASTM D 4052 0.888 0.905 閃點（開口杯）, ºC ASTM D 92 260 280 傾點 , ºC ASTM D 97 -18 -12 動粘度 @ 40ºC (cSt) ASTM D 445 226.4 463 @ 100ºC (cSt) ASTM D 445 19.18 30.5 粘度指数 ASTM D 2270 95 95 色度 ASTM D 1500 <2.5 <3.5 符合以下等級標準 •AGMA 9005-D94(EP) •DIN51517 Part 3 2004-01 •ISO 12925-1 CKC/CKD •US Steel 224*本公司保留修訂產品一般特性的權利.讓顧客享受最新指令要求之權利* KLISON INDUSTRIAL GEAR OIL GL-3 Product description : Klison Industrial Gear Oils GL-3 comprise a family of extreme pressure gear lubricants designed to operate over a very wide range of temperatures and conditions. These fluids possess excellent high temperature oxidation stability and superior low temperature fluidity. Klison Industrial Gear Oils GL-3 have the ability to rapidly separate from water and prevent the formation of anti-lubricating emulsions. The incorporation of special additives in Klison Industrial Gear Oils GL-3 protects equipment from rust, corrosion and foam. In addition, extreme pressure additives provide optimum protection against shock loading and offer high load carrying capabilities. Klison Industrial Gear Oils GL-3 find applications in virtually all types of industrial settings. Some typical applications includes gear sets and oil circulating systems in steel mill, foundries, glass and bottle manufacturing plants, injection molding machines, paper mills, electrical wheel motors used in surface mining and quarries, shearing arms in underground coal mining, cement kilns, petroleum and chemical processing plants. Benefits / Applications : •Excellent low and high temperature performance. •Prevents rust and corrosion. •Reduces galling, scuffing and welding of gear teeth. Typical Characteristics TESTDESCRIPTION METHOD TYPICAL RESULTS ISO Viscosity Grade 90 140 Specific Gravity @ 150C ASTM D-4052 0.888 0.905 Flash Point, 0C ASTM D-92 260 280 Pour Point, 0C ASTM D-97 - 18 -12 Kinematics Viscosity @ 400C (cSt) ASTM D-445 226.4 463 @ 1000C (cSt) ASTM D-445 19.18 30.5 Viscosity Index ASTM D-2270 95 95 Colour ASTM D-1500 < 2.5 < 3.5 Performance Standards: •US Steel 224 •DIN 51517 Part 3 •AGMA 9005-D94(EP) •DIN 51517 Part 3 2004-1 *We remain the right to modify this specification to satisfy request of the clients for the evolution of the newest science & technology.
-
KLISON 工業極壓齒輪油EP
克力森工業極壓齒輪油 EP KLISON INDUSTRIAL GEAR OIL EP 產品說明 Klison Industrial Gear Oil EP工業極壓齒輪油是一個應用廣泛的極壓齒輪潤滑系列.具有優良的高溫氧化穩定性和極佳的低溫流動性.能快速的與水分離可防止油的乳化變質.特殊極壓添加劑.能全面保護齒輪免於鏽蝕和磨損.此外.在震盪負荷和高負載的情況下仍能提供很好的齒輪表面保護. Klison Industrial Gear Oil EP工業極壓齒輪油幾乎能應用於所有工業齒輪系統.例如鋼鐵廠.玻璃廠等生產線中所使用的齒輪組及循環系統.還有注塑機器.造紙設備.電機.地下礦業.水泥窯及石化生產設備. 優點/用途 •高低溫表現優異. •超越美國US STEEL 224號.德國DIN51517第三部分.美國齒輪協會AGMA9005-D94等技術標準. •防鏽抗腐. •保護工業齒輪齒面免於擦傷.灼傷和壓傷. 典型物性 测量项目 测量方法 测量结果 極壓特性 Timken Load Arm Test Min OK Load, lb ASTM D-2782 65 四球極壓試驗 Load Wear Index (LXI), Kg Weld Load, Kg ASTM D-2783 53.7 250 FZG 載荷性試驗光 Test, Load Stage FZG Total Wt, Loss, mg DIN 51354 12 Pass 16.7 腐蝕性試驗 Part A Part B ASTM D-665(IP135) Pass Pass 测量项目 测量方法 测量结果 AGMA No. 2EP 3EP 4EP 5EP ISO 粘度等级 68 100 150 220 比重 @ 15 ºC ASTM D 4052 0.865 0.871 0.882 0.888 閃點（開口杯）, ºC ASTM D 92 228 232 252 260 傾點 , ºC ASTM D 97 -18 -18 -18 -18 動粘度 @ 40ºC (cSt) ASTM D 445 67.2 98.2 151 226.4 @ 100ºC (cSt) ASTM D 445 8.6 11.1 14.7 19.18 粘度指数 ASTM D 2270 98 98 96 95 色度 ASTM D 1500 <1.5 <1.5 <2.0 <2.5 测量项目 测量方法 测量结果 AGMA No. 6EP C,7EP BC,8EP 8AC,8EP ISO 粘度等级 320 460 680 1000 比重 @ 15 ºC ASTM D 4052 0.899 0.905 0.912 0.911 閃點（開口杯）, ºC ASTM D 92 266 272 268 250 傾點, ºC ASTM D 97 -18 -12 -9 -6 動粘度 @ 40ºC (cSt) ASTM D 445 327.4 463 670.3 1030 @ 100ºC (cSt) ASTM D 445 24.4 30.5 48.8 68.5 粘度指数 ASTM D 2270 95 95 125 132 色度 ASTM D 1500 2.5 <3.5 <3.5 <3.5 符合以下等級標準•AGMA 9005-D94(EP)•DIN51517 Part 3 2004-01•ISO 12925-1 CKC/CKD•US Steel 224 *本公司保留修訂產品一般特性的權利.讓顧客享受最新指令要求之權利* KLISON INDUSTRIAL GEAR OIL EP Product description : Klison Industrial Gear Oils EP comprise a family of extreme pressure gear lubricants designed to operate over a very wide range of temperatures and conditions. These fluids possess excellent high temperature oxidation stability and superior low temperature fluidity. Klison Industrial Gear Oils EP have the ability to rapidly separate from water and prevent the formation of anti-lubricating emulsions. The incorporation of special additives in Klison Industrial Gear Oils EP protects equipment from rust, corrosion and foam. In addition, extreme pressure additives provide optimum protection against shock loading and offer high load carrying capabilities. Klison Industrial Gear Oils EP find applications in virtually all types of industrial settings. Some typical applications includes gear sets and oil circulating systems in steel mill, foundries, glass and bottle manufacturing plants, injection molding machines, paper mills, electrical wheel motors used in surface mining and quarries, shearing arms in underground coal mining, cement kilns, petroleum and chemical processing plants. Benefits / Applications : •Excellent low and high temperature performance. •Prevents rust and corrosion. •Reduces galling, scuffing and welding of gear teeth. Typical test results for ISO 220 are : TEST DESCRIPTION METHOD RESULTS Extreme Pressure Properties Timken Load Arm Test Min OK Load, lb ASTM D-2782 70 Four Ball Extreme Pressure Test Load Wear Index (LXI), Kg Weld Load, Kg ASTM D-2783 53.7 250 FZG Load Carrying Test FZG 4 Square Gear Test, Load Stage FZG Total Wt, Loss, mg DIN 51354 12 Pass 16.7 Rust Test Part A Part B ASTM D-665(IP135) Pass Pass Typical Characteristics: TESTDESCRIPTION METHOD TYPICAL RESULTS AGMA No. 2EP 3EP 4EP 5EP 6EP C,7EP BC,8EP 8AC,8EP ISO Viscosity Grade 68 100 150 220 320 460 680 1000 Specific Gravity @ 150C ASTM D-4052 0.884 0.888 0.896 0.898 0.900 0.905 0.912 0.911 Flash Point, 0C ASTM D-92 228 232 245 250 260 272 268 250 Pour Point, 0C ASTM D-97 - 15 - 15 - 15 - 12 - 12 - 9 - 3 - 3 Kinematics Viscosity @ 400C (cSt) ASTM D-445 67.2 98.2 151 226.4 327.4 463 670.3 1030 @ 1000C (cSt) ASTM D-445 8.6 11.1 14.7 19.18 24.43 30.5 39.13 53.2 Viscosity Index ASTM D-2270 98 98 96 95 95 95 96 100 Colour ASTM D-1500 < 1.5 1.5 < 2.0 < 2.5 < 2.5 < 3.5 > 5.0 < 5 Performance Standards: •US Steel 224 •DIN 51517 Part 3 •AGMA 9005-D94(EP) •ISO 12925-1 CKC/CKD *We remain the right to modify this specification to satisfy request of the clients for the evolution of the newest science & technology.
-
KLISON 水性切削油 G-15
水溶性切削油G-15 KLISON SOLUBLE CUTTING OIL G-15 產品說明 Klison Soluble Cutting Oil G-15是水溶性金屬工作液.配有芬香味道之穩定乳化劑.可與水混合供廣泛稀釋使用.其乳化穩定性不受硬水離子之影響.且在高速之金屬作業亦不會產生泡沫. Klison Soluble Cutting Oil G-15具高吸熱功能..可供金屬作業之優越冷卻效用. Klison Soluble Cutting Oil G-15亦具有強力破壞生物性.可有效抑制細菌導致腐敗而產生臭味及乳化裂解.而降低產品品質.從而獲得滿意的工作環境及優越的操作效能. Klison Soluble Cutting Oil G-15 亦可提供優良的防鏽作用. Klison Soluble Cutting Oil G-15 可供中度.低度負荷之鐵及非鐵加工機器運作. (但鎂除外)可使用於鋸.鑽.磨.彎曲…等機器作業.其優越之濕潤.冷卻特性.能有優越的研磨成效.研磨彎曲之稀釋比例從1:10.到比例1:40的研磨使用. 優點/用途 •抗生銹.腐蝕. •不起泡. •良好濕潤及冷卻能力. •抗菌. •良好工作環境具香味. 典型物性 測 試 項 目 測 試 結 果 外觀 琥珀色液體 比重 0.89 Emulsion : 乳狀 pH at 3% 8.8 IP287腐蝕測試 % 2.5 抗泡性.cc(5%濃度.水硬度50ppm) 無 折射系數 0.98 *本公司保留修訂產品一般特性的權利.讓顧客享受最新指令要求之權利*2018.12 KLISON SOLUBLE CUTTING OIL G-15 Product description : Klison Soluble Cutting Oil G-15 is a water-soluble metal working fluid formulated with fragrance that forms a very stable emulsion when mixed with water at a wide range of dilutions. The stability of this emulsion is not affected by hard water ions and the fact that it does not foam makes it ideal for high-speed metal working operations. The high heat absorbing characteristics of Klison Soluble Cutting Oil G-15 provided superior cooling for a variety of metals working processes. Klison Soluble Cutting Oil G-15 is fortified with biocides to prevent rancidity caused by bacteria, which can lead to unpleasant odors, split emulsions and reduced product performance. This feature results in greater worker satisfaction and optimum product performance. Klison Soluble Cutting Oil G-15 also provides excellent protection against rust. Klison Soluble Cutting Oil G-15 is recommended for light to moderate duty machining operations on all ferrous and non-ferrous metals except magnesium. It will find use in machining, sawing, drilling, milling and turning. It is ideal for grinding due to its superior wetting and cooling properties. Typical dilution ratios with water range from 1:10 for milling and turning to 1:40 for grinding. Benefits / Applications : Protects against rust and corrosion. Non-foaming. Excellent wetting and cooling capabilities. Resists bacterial attack. Formulated with perfume for pleasant working environment. Typical Characteristics: TEST DESCRIPTION TYPICAL RESULTS Appearance Amber Specific Gravity 0.89 Emulsion : Milky pH at 3% 8.8 IP 287 Corrosion Test % 2.5 Defoam ml (5% in 50ppm water) Nil Refractometer Factor 0.98 *We remain the right to modify this specification to satisfy request of the clients for the evolution of the newest science & technology.