Model : LD-1216GH / LD-1224GH / LD-1236GH / LD-1336GH / LD-1340GH
METRIC (INCH)
Model No.
1216GH
1224GH
1236GH
1336GH
1340GH
Swing Over Bed
305mm (12")
330mm (13")
Swing Over Saddle
153mm (6")
165mm (6 1/2")
Swing Over Gap
445mm (18")
480mm (19")
Distance Between Centers
406mm (16")
610mm (24")
915mm (36")
1000mm(40")
Bed Width
190mm (7 1/2")
Spindle Bore
40mm (1 9/16")
Taper Of Spindle Nose
MT 5
Taper Of Tailstock Barrel
MT 3
Spindle Nose
D 1-4 Camlock
Travel Of Cross Slide
170mm (6-3/4")
Travel Of Top Slide
90mm (3-1/ 2")
Travel Of Tailstock Barrel
100mm (4")
Number Of Spindle Speeds
12
Range Of Spindle Speeds
70-1500 R.P.M.
Number Of Metric Threads
24
Range Of Metric Pitches
0.25-7mm
Number Of Inch Threads
40
Range Of Inch Threads
4-112 T.P.I
Main Motor
1.5 HP/ 1PH or 2HP 3PH
Measurement(Without Stand)1set/case
1270x760x760mm (50"x30"x30")
1473x760x760mm (58"x30"x30")
1780x760x760mm (70"x30"x30")
1855x760x760mm (73"x30"x30")
Net Weight(Kgs)
260
280
300
310
320
Features:
1.Bed is made of high tensile cast iron FC250.
2.Hardened and ground bedways.
3.D1-4 camlock spindle.
4.Metric or imperial specification depend on customer’s instruction.
*Please indicate following specifications upon order
1.Lead screw and reading dial in inch or metric.
2.Left or right apron hand wheel.
3.Electrical voltage and cycles.
Standard accessories:
1.Motor and motor pulley.
2.D1-4 back plate for 6”
3.D1-4 back plate for 8”
4.Center sleeve (MT5 × MT3).
5.Center (MT3).
6.4-way tool post.
7.Change gears.
8.Tool box & kits.
Option accessories:
1.Steady rest.
2.Follow rest.
3.Face plate 10”.
4.Drill chuck 1/2” (13mm).
5.Rolling center (MT3).
6.3-jaw scroll chuck 6”(160mm).
7.4-jaw independent chuck 8”(200mm).
8.Floor stand.
9.Coolant pump system.
10.Taper turning attachment.
11.Quick change toolpost.
12.Single saddle stop.
13.4-position saddle stop.
14.Rear splash guard.
15.Chuck guard.
16.5C collet closer.
17.DRO equipment.
18.Work light.