Model :LD-1440VS/LD-1440TS
Metric (Inch)
Model No.
1440VS
1440TS
Capacity
Swing Over Bed
360mm (14")
Swing Over Gap
520mm (20-3/4")
Swing Over Cross Slide
225mm (8-3/4")
Center Height
180mm (7")
Distance Between Centers
1000mm (40")
Bed
Length
1648mm (65")
Width
230mm (9")
Width Of Gap
195mm (7-5/8")
Main Spindle
Spindle Nose
D1-4 Camlock
Spindle Bore
40mm (1-1/2")
Taper In Nose
MT 5
Taper In Bush
MT 3
Spindle Speeds
(H)300-2200r.p.m. (L)36-300r.p.m
50-2000r.p.m.(12 Numbers)
Carriage
Cross Slide Travel
180mm (7")
Compound Rest Travel
96mm (3-3/4")
Tailstock
Quill Diameter
40mm (1-9/16")
Quill Travel
100mm (4")
Quill Taper
MT 3
Threading &Feeding
Leadscrew Diameter
24mm (15/16")
Pitch
4mm
Metric Threads
0.4-7mm/pitch (30 Numbers)
Inch Threads
4-56TPI (32 Numbers)
Longitudinal Feeds
0.0026"-0.0368"rev. 0.066mm-0.935mm/rev
Power
Main Drive Motor
5HP/3PH
Coolant Pump
1/8HP/1PH
Packing Dimensions(LxWxH)
1930x813x1600mm (76"x32"x62")
Weight
N.W.
720kgs
G.W.
820kgs
Features:
1.Bed is made of high tensile cast iron FC250.
2.Bed ways are Harden and ground .
3.Gears is headstock are hardened and ground.
4.Leadscrew is equipped with torque limit safety device.
5.Feed rod is equipped with over load safety clutch.
6.Rapid foot-operated brake.
7.Starting lever with safety device.
8.Apron is equipped with an interlock safety device to prevent feeding intergearing on the automatic 9.feed and the half-nut operation.
10.Overload safety device is equipped to shut off feeding automatically when the longitudinal or cross 11.feeding is overload or touching with obstacle.
*Please indicate following specifications upon order
1.Lead screw and reading dial in inch or metric.
2.Left or right apron hand wheel.
3.Electrical voltage and cycles.
Standard accessories:
1.5HP 3PH main drive motor.
2.D1-6 back plate for 6”(160mm) chuck.
3.D1-6 back plate for 8”(200mm) chuck.
4.MT 3 center.
5.Center sleeve (MT5×3).
6.4-way tool post.
7.Complete electric control unit.
8.Change gears.
9.1/8HP coolant pump equipment.
10.Rear splash guard.
11.Rapid foot brake.
12.Tool box & kits.
Option accessories:
1.Steady rest.
2.Follow rest
3.Face plate 10" (250mm)
4.Drill chuck 1/2" (13mm) w/arbor
5.Rolling center MT3
6.3-jaws scroll chuck 6" (160mm) 3-Jaws scroll 6" chuck
7.4-jaws independent chuck 8" (200mm) 4-Jaws independent 8" chuck
8.Taper turning attachment.
9.Quick change toolpost (with 4 toolholders).
10.Single saddle stop.
11.4-positions saddle stop.
12.Chuck guard.
13.5C collet closer.
14.DRO(Digital read out )equipment.
15.Work light.