KLISON 滑道機油
克力森滑道機油
KLISON WAY LUBRICANT OIL
產品說明
克力森滑道機油 是由高度精煉基礎油與優質複合添加劑掺配而成, 對金屬之附著性佳, 有效潤滑各種工作母機之滑動面及滑道, 防止及減少車床面之跳動現象, 使工作母機操作順利, 提高加工產品品質.
克力森滑道機油 是復合型油品, 能提供合理的靜磨擦系數與動磨擦系數之間的比例, 適用于重載機器工具滑軌, 不論水平放置或垂直放置, 主要用於磨床.車床.鑽孔機械.鑽井機械等.
優點/用途
•抗磨.
•防腐抗銹.
•防爬行現象.
•粘著性好.
典型物性
測試項目
測試方法
測試結果
ISO粘度
68
150
220
比重 @ 150C
ASTM D-4052
0.870
0.878
0.889
閃火點, 0C
ASTM D-92
235
242
254
, 0C
ASTM D-97
- 20
-15
-12
運動黏度
@ 400C (cSt)
ASTM D-445
70.9
148.7
226
@ 1000C (cSt)
ASTM D-445
9.1
14.8
19.4
粘度指數
ASTM D-2270
102
99
98
色度
ASTM D-1500
2.0
2.5
3.0
*本公司保留修訂產品一般特性的權利, 讓顧客享受最新指令要求之權利.*
相關產品
-
KLISON 變壓器油601
克力森變壓器油 KLISON INSULATING OIL 601 產品說明 Klison Insulating Oil 601是優良的絕緣用油,為極高度精煉之絕緣油料,廣泛使用於各種油浴式變壓器.油浴式斷路器(OCB).電容器.電纜及其他電力電訊機械,不但具有優異的高絕緣特性,同時具有優良的氧化穩定性及散熱冷卻之特性,不含有害之無機酸.硫份及多氯聯苯(PCBs),能長期使用,也能延長變壓器的使用壽命,可滿足各大電器設備製造商之技術要求。 優點/用途 •高絕緣強度,黏度低冷卻佳,高閃火點安全性好。 •高氧化穩定性,沉積物少。 •精煉超純,無酸鹼.無硫,不腐蝕銅金屬。 •不含化學鹽類,更不含多氯聯苯(PCBs) 符合標準台灣電力公司 I-002(100-04) 典型物性 测量方法 規範值 测量值 1.外觀 ASTM D 1524 澄清無沉澱物 符合 2.顏色 ASTM D 1500 0.5max L0.5 3.比重 @ 15 ºC ASTM D 4052 0.91max 0.8264 4.閃點(開口杯), ºC ASTM D 92 145min 162 5.傾點 , ºC ASTM D 97 -30max -36 6.粘度 @ 40ºC (mm2/s,cSt) ASTM D 445 12.0max 7.748 @ 100ºC(mm2/s,cSt) ASTM D 445 3.0max 2.290 @ 0ºC(mm2/s,cSt) ASTM D 445 76.0max 36.50 7.界面張力@ 25 ºC(Dynes/cm) ASTM D 971 40.min 55.5 8.中和價TBN mgKOH/g ASTM D 974 0.03max 0.004 9.腐蝕硫 ASTM D 1275 無 無 10.抗氧化劑含量 % ASTM D 2668 0.08max 0.08 11.含水量 (mg/kg,ppm) ASTM D 1533 35max 6 12.氧化安定性試驗72小時 油泥 % mass 總酸價 mgKOH/g ASTM D 2440 0.15max 0.50max 0.015 0.008 13.氧化安定性試驗164小時 油泥 % mass 總酸價 mgKOH/g ASTM D 2440 0.30max 0.60max 0.096 0.007 14.功率因數 % @ 100ºC 60Hz ASTM D 924 0.30max 0.035 15.電阻係數@ 50ºC ASTM D 1169 1.0x1014min 393x1014 16.電介質強度(2.0mm gap)kV ASTM D 1816 35min 58.6 17.多氯聯苯含量 ppmw NIEA T601.30B 2max 未檢出 18.2-糠醛含量 ug/L ASTM D 5837 5max 未檢出 *本公司保留修訂產品一般特性的權利.讓顧客享受最新指令要求之權益* 2014.03
-
KLISON泛用農機傳動油 15W40
克力森泛用農機傳動油 KLISON UNITRAC OILS SAE 15W/40 •Single oil for all applications. •Eliminates seasonal oil changes. •Better oxidation stability at high temperatures. •Meets the performance requirements of many tractor manufacturers. •單一油品多用途使用. •適合四季氣候使用. •高溫作業下仍具氧化穩定性. •符合多數農耕機製造廠之機械要求. KLISON UNITRAC OILS 15W/40是一種超高級農耕機綜合用油,可適用於農耕機引擎曲軸箱,差速齒輪,末級傳動及液壓系統. KLISON UNITRAC OILS 15W/40,是一種石臘基礎油及多功能添加劑摻配而成,黏度適當,抗氧化性強,具有低溫啟動,抗磨損抗腐蝕之特性,適合各種農業曳引機,農耕機之引擎,曲軸箱系統,差速齒輪,末級傳動及液壓系統,亦可使用於溼式剎車及動力離合器系統之共同潤滑使用. KLISON UNITRAC OILS 15W/40符合MIL-L –2104E, MIL-L –46152D, API CF-4,CF&SH,MIL-L-2105,API GL-4.符合John Deers J20B,Ford M2C 134B/C,Massey-Fergason PermatronIII,Allison C3,C4等曳引機傳動油之規範 TYPICAL INSPECTIONS: SAE15W/40 GRAVITY,API 15.6oC 28 VISCOSITY40oC CST 110 VISCOSITY100oC CST 14.9 VISCOSITY INDEX 136 FLASH POINT,COC oC 220 POUR POINT oC -27 COLOR 2.5 TOTAL BASE NUMBER mg KOH/g 11 SULFATED ASH wt% 1.45 API Service Classifcation CF4/SH/ GL-4 *本公司保留修訂產品一般特性的權利.讓顧客享受最新指令要求之權利*
-
KLISON通用 機油
克力森通用機油 KLISON GENERAL PURPOSE OIL 產品說明 克力森通用機油是由高度精煉礦物油掺配而成, 氧化穩定性高, 對於結膠及污物具有良好之溶解及沖洗能力, 故亦廣泛用於換油時清洗引擎潤滑系統。 克力森通用機油也適用於一般輕度作業齒輪箱及軸承之潤滑。 克力森通用機油SAE 50廣用於燒球式魚船引擎汽缸及軸承之潤滑。 包裝:200公升桶裝 典型物性 測試項目 測試方法 測試結果 SAE 粘度 10 20 30 40 50 比重 @ 150C ASTM D-4052 0.850 0.860 0.871 0.878 0.887 閃火點, 0C ASTM D-92 220 230 250 255 270 , 0C ASTM D-97 - 25 - 20 - 18 -15 -12 運動黏度 @ 400C (cSt) ASTM D-445 23.64 44.95 96.94 150.25 201.85 @ 1000C (cSt) ASTM D-445 4.51 6.84 11.03 15.32 18.52 粘度指數 ASTM D-2270 102 107 103 103.3 101.5 色度 ASTM D-1500 <0.5 < 0.5 1.5 2.0 2.5 *本公司保留修訂產品一般特性的權利.讓顧客享受最新指令要求之權益* KLISON GENERAL PURPOSE OIL Product Description: Klison General Purpose Oil is highly refined mineral oil blending with excellent oxidation stability. Klison General Purpose Oil possess very good ability for dissolving and flushing gum & sludge so that are also used in washing engine lubrication system. Klison General Purpose Oil are suited for the lubrication of gear box and bearing of general light duty work. Packages : 200liter drum Typical characteristics: TEST DESCRIPTION METHOD TYPICAL RESULTS SAE Viscosity 10 20 30 40 50 Specific Gravity @ 150C ASTM D-4052 0.850 0.860 0.871 0.878 0.887 Flash Point, 0C ASTM D-92 220 230 240 250 260 Pour Point, 0C ASTM D-97 - 25 - 20 - 18 -15 -12 Kinematics Viscosity @ 400C (cSt) ASTM D-445 23.64 44.95 96.94 140.3 183.7 @ 1000C (cSt) ASTM D-445 4.51 6.84 11.03 14.55 17.24 Viscosity Index ASTM D-2270 102 107 103 103 100 Colour ASTM D-1500 <0.5 < 0.5 1.0 1.0 1.5 *We remain the right to modify this specification to satisfy request of the clients for the evolution of the newest science & technology.
-
KLISON COMPRESSOR OIL HC&SC
KLISON AIR COMPRESSOR OIL Product description : Klison Air Compressor Oils are hydrocracked based fluids designed for use in air compressors and high temperature circulating systems where freedom from deposit formation is desired. Formulated from highly refined hydrocracked base stocks, Klison Air Compressor Oils is resistant to oxidation, thereby minimizing the formation of acidic oxidation products that can lead to system corrosion and reduced oil life. The naturally high viscosity index of the base fluid provides stable viscosity characteristics and maintaining a tough fluid film, even at high operating temperatures. Klison Air Compressor Oils are fortified with detergent components, which retard the formation of varnish and carbon. The detergent prevents plugging of compressor vane slot and keeps compressor cylinders, check valves and discharge line clean. Klison Air Compressor Oils also inhibit formation of sludge intercoolers and aftercoolers. Benefits / Applications : •Effective detergent •Minimizes deposit formation. •Superior anti-wear properties. •Resists Typical Characteristics: TEST DESCRIPTION METHOD TYPICAL RESULTS ISO Viscosity Grade HC32 HC46 HC68 SC100 SC150 Specific Gravity @ 150C ASTM D-4052 0.852 0.857 0.865 0.888 0.893 Flash Point, 0C ASTM D-92 218 226 232 238 245 Pour Point, 0C ASTM D-97 - 20 - 20 - 18 - 15 - 15 Kinematics Viscosity @ 400C (cSt) ASTM D-445 32 45.4 64.2 95.7 148 @ 1000C (cSt) ASTM D-445 5.44 7.3 8.3 10.8 14.5 Viscosity Index ASTM D-2270 110 123 106 96 96 Color ASTM D-1500 < 0.5 < 1.0 < 1.0 < 1.0 < 1.5 Performance Standards: DIN 51506 VDL specifications. Suitable for following type of compressors: (1) Screw Compressor; HC-32.46.68 Only (2) Piston and Reciprocating Compressor; (3) Vacuum Pump Compressor; (4) Airman; and (5) Other Japanese Brand Compressor. *We remain the right to modify this specification to satisfy request of the clients for the evolution of the newest science & technology.
-
KLISON 全合成機油 5W20SNCF
克力森全合成機油 5W/20 SN/CF KLISON FULLY SYNTHETIC TURBO MOTOR OIL 產品說明: 克力森全合成機油5W/20通過美國石油協會API SN及”節能”標誌 & ILSAC GF-5等級認證, 並符合歐洲汽車製造商協會ACEA A-1/B1,ACEA A5/B5及福特汽車WSS-M2C948-A,福特汽車WSS-M2C948-B之等級標準。 克力森全合成機油5W/20採用高科技性能100%全合成含酯基礎油及最先進技術配方添加劑摻配製成, 適合於高速公路及市區之駕駛。本油具極優異之熱穩定性油膜強韌安定, 同時具有極優異的抗氧化性及低溫流暢效果, 較之傳統礦物油更可延長換油里程。完全適用於加裝廢氣微粒過濾器及觸媒轉化器之引擎使用。 克力森全合成機油5W/20, 適用於輕型柴油引擎使用, 能降低機件磨損, 清潔引擎, 並延長引擎之壽命。是一種四季全天候泛用之全效潤滑機油。 包裝 : 1公升X12瓶裝/箱 ,19公升/桶 ,200公升/桶裝 通過美國石油協會API認證及符合規範等級標準: API SN Approval No. 3023 API SN/SM/CF ILSAC GF-5, Approval No. 3023 ACEA A1/B1-12, A5/B5-12 FORD WSS-M2C948A FORD WSS-M2C948B 典型物性 檢驗項目 测量方法 测量结果 SAE 粘度等级 SAE J 300 5W/20 比重 @ 150C ASTM D 4052 0.8545 閃點(開口杯), 0C ASTM D 92 227 傾點 , 0C ASTM D 97 -42 動粘度 @ 400C (cSt) ASTM D 445 49.8 @ 1000C (cSt) ASTM D 445 8.9 粘度指数 ASTM D 2270 160 總鹼價TBN mgKOH/g ASTM D 2896 7.6 低溫黏度CCS@-300C,Cp ASTM D5293 4500 色度 ASTM D 1500 3.0 *本公司保留修訂產品一般特性的權利.讓顧客享受最新指令要求之權益*2018.12 Klison Fully Synthetic Turbo Motor Oil 5W/20 Product Description: The oils are API SN & Resource Conserving & ILSAC GF-5 centificated and meet with the ACEA A1/B1,ACEA A5/B5&FORD WSS-M2C948-A,FORD WSS-M2C948-B service grade. The oils are blended with the 100% fully synthetic base oil and the best additives. It is the best for highway and city driving mode. It has excellent thermal stability and oil film stable. It also possesses excellent oxidation and pour effect in low temperature. Oil change mileage is much longer than those of mineral oils. The oils are suitable for any type of combustion engines with particular filter and catalysts converter. It is blended in a new formulation technology which can offers light duty diesel motor engine more wear reduction, engine cleaning and engine life prolongation. Package : 1 liter x 12/carton 19 liters/pail 200 liters/drum API Certificated, Specification & Recommendation API SN Approval No. 3023 API SN/SM/CF ILSAC GF-5, Approval No. 3023 ACEA A1/B1-12, A5/B5-12 FORD WSS-M2C948A FORD WSS-M2C948B Typical characteristics: TEST DESCRIPTION METHOD TYPICAL RESULTS SAE Viscosity Grade SAE J 300 5W/20 Specific Gravity@ 150C ASTM D 4052 0.8545 Flash Point, 0C ASTM D 92 227 Pour Point , 0C ASTM D 97 -42 Kinematics Viscosity @ 400C (cSt) ASTM D 445 49.8 @ 1000C (cSt) ASTM D 445 8.9 Viscosity Index ASTM D 2270 160 CCS@-300C ,Cp ASTM D5293 4500 TBN mgKOH/g ASTM D 2896 7.6 Colour ASTM D 1500 3.0 *We remain the right to modify this specification to satisfy request of the clients for the evolution of the newest science & technology.