UL 20276 X 10P LCD Signal Cable
1.Inner wiring of computers and videos.2.Special designs are subject to customers' requirements.
Specifications
1.Conductor：Tinned Copper Strand. 2.Insulation：HDPE ( High Density Polyethylene)3.Wrapping Shield：Bare or Tinned Copper on Strand4.Sheath：PVC(Polyvinyl Chloride) 5.Structure：
Conductor
Insulation (Twist)
AWG
Construction
Diameter
Min.Thickness
Nominal Thickness
Diameter
30
7 / 0.10TA
approx.0.30mm
0.31mm
0.15mm
0.60 ± 0.03mm
Assembly
Braid Shield
Sheath
ConductorResistantce(20℃)
# 30 (7 / 0.10TA)
ConstructionThickness
DiameterThickness
Min
Nominal
Diameter
Cotton Yarn Filler
Al-mylar Tape
0.025X20 mm
16 / 8 / 0.10
approx.0.30mm
0.31mm
0.15mm
0.60 ± 0.03mm
Max.362.88W/Km
6.Characteristics：
Items
Specification
Rating
UL：80℃ 30V
Dielectric Strength
Spark Test AC2000V / min.
Insulation Resistance
Min.5MW - Km (20℃) at DC 500V
Flame Test
UL：VW – 1
7.Marking：E54979 AWM 20276 80℃ VW – 1
相關產品
-
HDMI TWP FLAT CABLE
Optionally supports output of Dolby True HD and DTS-HD Master Audio streams for external decoding by AV receivers.( TrueHD and DTS-HD are lossless audio codec formats used on Bly-ray Discs and HD DVDs . ) Specifications Optionally supports output of Dolby True HD and DTS-HD Master Audio streams for external decoding by AV receivers.( TrueHD and DTS-HD are lossless audio codec formats used on Bly-ray Discs and HD DVDs . ) 1. Construction Differential signal Control and other signal Conductor Material - Silver coated annealed copper wire Tin coated annealed copper wire Diameter mm Approx. 0.254 (Size:30AWG) Insulation Material - Foam PE PE Color - White , Red Green , White , Red Diameter mm Approx. 0.7 Approx. 0.5 Twisting Composition - Two insulated conductors (White-wire and Red-wire) shall be uniformly twisted together. - Shield Composition 4 sets of twisted pairs, 4 sets of drain lines and 7 sets of control lines are arranged in alignment as shown in the attached drawing and wrapped by a shield tape. Shield tapes are also inserted between the twisted pairs, separating each pair. There should not be gaps in the wrapping shield tape and in the shield tapes between the twisted pairs. Also, both the ends of the wrapping shield should be glued without gaps, and the edged part glued should be neatly cut without forming a projection. Kind - For outsides : Aluminum Polyester Laminating Tape For inside : Aluminum Polyester Aluminum Laminating Tape Thickness mm For outsides : 0.025 (Al : 0.006) For inside : 0.03 (Al : 0.006) Drain Material - Tin coated annealed copper wire Diameter mm Approx. 0.254 (Size : 30AWG) Jacket Material - PVC Color - Black Thickness mm Nom. 0.5 Overall diameter mm H*W=1.85 ´ 11.5 ( ± 0.1 ) Marking E54979 AWM 20276 80℃ 30V VW-1 TATUNG - HDMI 2. Rating Rating Voltage V 30 Rating Temperature ℃ 80 3. Performance Electrical Requirements Conductor resistance Ω/km Max.361 ( at 20℃ ) Dielectric strength V-min To withstand 300 Volts R.M.S. for one minute. (Between all interconnected conductors, and all the interconnected shields.) Insulation resistance (Between conductor and earth) MΩkm Min. 10 This measurement shall be made with 150 volts D.C. after steady electrification for one minute. (During the tests, remaining conductors shall be connected to earth.) Differential impedance Ω Cable Area 100±10 Connector Area 100±15 Delay* ns/m Max. 5.05 Inter-Pair Skew* ns Max. 2.42 Intra-Pair Skew* ps Max. 151 Far-end crosstalk* dB Max. -26 dB (f=300k～5000MHz) Insertion Loss* dB Min. - 8 dB (f=300k～825MHz) Min. -21 dB (f=825M～2475MHz) Min. -30 dB (f=2475M～4125MHz) Capacitance** pF Max. 700 *Differential signal line **Between Pin No.15 to No.17 and No.16 to No.17 4. Cable FLAME TEST To conform to UL 1581 VW-1 combustion test. 5. RoHS Regulation Material name Rated value Cadmium and Cadmium Compounds 75ppm Hexavalent Chromium Compounds 1000ppm Lead and Lead Compounds 300ppm Mercury and Mercury Compounds 1000ppm PBB (Polybrominated Biphenyls) 1000ppm PBDE（Polybrominated Diphenyl Ethers） 1000ppm 6. Cable Wire Assignment Pin Color Cable Function 1 Red TMDS Data 2+ 3 White Green 2 Drain TMDS Data 2 Shield 4 Red TMDS Data 1+ 6 White TMDS Data 1- 5 Drain TMDS Data 1 Shield 7 Red TMDS Data 1 Shield 9 Red TMDS Data 0- 8 Drain TMDS Data 0 Shield 10 Red TMDS Data Clock+ 12 White TMDS Data Clock- 11 Drain TMDS Clock Shield 13 Green CEC 14 Red Reserved（N.C. on device） 15 White SCL 16 Green SDA 17 Red DDC/CEC Ground 18 Red +5V Power 19 White +5V Power
-
Cat.5 UTP 24AWG 25P、50P、100P
LAN CABLE is suitable for data transmission on Local Area Network , especially for computer, video or perfect audio. Specifications 1. Wire Construction： Pair Wire Arrangement Pair Wire Arrangement 1 P Blue ´ White 14 P Brown ´ Black 2 P Orange ´ White 15 P Gray ´ Black 3 P Green ´ White 16 P Blue ´ Yellow 4 P Brown ´ White 17 P Orange ´ Yellow 5 P Gray ´ White 18 P Green ´ Yellow 6 P Blue ´ Red 19 P Brown ´ Yellow 7 P Orange ´ Red 20 P Gray ´ Yellow 8 P Green ´ Red 21 P Blue ´ Violet 9 P Brown ´ Red 22 P Orange ´ Violet 10 P Gray ´ Red 23 P Green ´ Violet 11 P Blue ´ Black 24 P Brown ´ Violet 12 P Orange ´ Black 25 P Gray ´ Violet 13 P Green ´ Black 25P: with no color tape 50P: 1P~25P unit is wrapped with one white tape and one blue tape, 26P~50P unit with white and orange 100P:1P ~ 25P unit is wrapped with one white tape and one blue tape, 26P ~ 50P unit with white and orange, 51P ~ 75P unit with white and green 76P ~ 100P unit with white and brown. 2. Structure Item Specification Conductor Material Annealed Copper Construction 1 / 0.52 mm Diameter Approx. 0.52 mm Insulation Material HDPE Average Thickness Approx. 0.2 mm Diameter 0.92 ± 0.05 mm Twisted Refer to structure figure Assembly Arranged in accordance with the structure figure. Jacket Material PVC or LSOH Average Thickness Approx. 1.0 mm Diameter (25P) Approx. 14.0 mm Diameter (50P) Approx. 14.0 × 26.0 mm Diameter (100P) Approx. 31.0 mm 3. Electrical Characteristics: Comply with TIA/EIA-568-B.2 Standard. Item Electrical Characteristics of Cable Impedance ( 1 – 100 MHz) 100 ± 15 Ω Conductor Resistance ( 20℃ ) 9.38 Ω Per 100 m ( 328 ft ) Resistance Unbalance ( 20℃ ) Max. 5% Insulation Resistance ( 20℃ ) 1500M W - Km DC 500V (Between wire and ground) Dielectric strength DC 500V / 1min. or AC 350 V / 1min. Mutual Capacitance (1KHz) Max. 5.6 nF Per 100 m ( 328 ft ) Capacitance unbalance (1KHz) 330 pF Per 100 m ( 328 ft ) ( pair to ground) Delay Skew Max. 45 ns Per 100 m ( 328 ft ) Frequency Insertion Loss (dB/ 100m ) Max. Propagation Delay 0.772MHz 1.8 — 1 MHz 2.0 534 + 36/ √f (f：MHz) 4 MHz 4.1 8 MHz 5.8 10 MHz 6.5 16 MHz 8.2 20 MHz 9.3 25 MHz 10.4 31.25 MHz 11.7 62.5 MHz 17.0 100 MHz 22.0 Frequency NEXT (dB/ 100m ) Min. PSNEXT (dB/ 100m ) Min. ELFXT (dB/ 100m ) Min. PSELFXT (dB/ 100m ) Min. 0.772MHz 67.0 64.0 — — 1 MHz 65.3 62.3 63.8 60.8 4 MHz 56.3 53.3 51.7 48.7 8 MHz 51.8 48.8 45.7 42.7 10 MHz 50.3 47.3 43.8 40.8 16 MHz 47.3 44.4 39.7 36.7 20 MHz 45.8 42.8 37.7 34.7 25 MHz 44.3 41.3 35.8 32.8 31.25 MHz 42.9 39.9 33.9 30.9 62.5 MHz 36.4 35.4 27.8 24.6 100 MHz 35.3 32.3 23.8 20.8 Return Loss (dB/ 100m ) 1≦ f ＜10MHz RL≧ 20+5.0 log(f) 10≦ f ＜20MHz RL≧ 25
-
CAT5E-FTP-4P
LAN CABLE is suitable for data transmission on Local Area Network , especially for computer, video or perfect audio. Specifications 1. Wire Construction: Pair Wire Arrangement 1 P Blue ´ White / Blue Stripe 2 P Orange ´ White / Orange Stripe 3 P Green ´ White / Green Stripe 4 P Brown ´ White / Brown Stripe 2. Structure: Item Specification Conductor Material Annealed Copper Construction 1 / 0.54 mm Diameter 0.54 ± 0.005 mm Insulation Material HDPE Average Thickness 0.247 mm Diameter 1.03 ± 0.02 mm Twisted Refer to structure figure Assembly Arranged in accordance with the structure figure. Non-woven tape Approx. 0.2 mm in thick. Drain Wire Material Annealed Tinned Copper Construction 1 / 0.515 mm Al - Mylar Approx. 0.06mm in thick. (with Al side in) Jacket Material PVC or LSOH Average Thickness 0.6 mm Diameter 6.3 ± 0.2 mm Packing 305 m plywood drum in a box 3. Electrical Characteristics： Comply with TIA/EIA-568-B.2 Standard. Item Electrical Characteristics of Cable Impedance ( 1 – 100 MHz) 100 ± 15 Ω Conductor Resistance (20℃) 9.38 Ω Per 100 m (328 ft) Resistance Unbalance (20℃) Max. 5% Insulation Resistance (20℃) 1500MW - Km DC 500V (Between wire and ground) Dielectric strength DC 500V / 1min. or AC 350 V / 1min. Mutual Capacitance (1KHz) Max. 5.6 nF Per 100 m (328 ft) Capacitance unbalance (1KHz) 330 pF Per 100 m (328 ft) ( pair to ground) Delay Skew Max. 45 ns Per 100 m (328 ft) Frequency Insertion Loss (dB/100m) Max. Propagation Delay 0.772MHz 1.8 — 1 MHz 2.0 534 + 36/ √f (f：MHz) 4 MHz 4.1 8 MHz 5.8 10 MHz 6.5 16 MHz 8.2 20 MHz 9.3 25 MHz 10.4 31.25 MHz 11.7 62.5 MHz 17.0 100 MHz 22.0 Frequency NEXT (dB/100m) Min. PSNEXT (dB/100m) Min. ELFXT (dB/100m) Min. PSELFXT (dB/100m) Min. 0.772MHz 67.0 64.0 — — 1 MHz 65.3 62.3 63.8 60.8 4 MHz 56.3 53.3 51.7 48.7 8 MHz 51.8 48.8 45.7 42.7 10 MHz 50.3 47.3 43.8 40.8 16 MHz 47.3 44.4 39.7 36.7 20 MHz 45.8 42.8 37.7 34.7 25 MHz 44.3 41.3 35.8 32.8 31.25 MHz 42.9 39.9 33.9 30.9 62.5 MHz 36.4 35.4 27.8 24.6 100 MHz 35.3 32.3 23.8 20.8 Return Loss (dB/100m) 1≦ f ＜10MHz RL≧ 20+5.0 log(f) 10≦ f ＜20MHz RL≧ 25 20≦ f ＜100MHz RL≧ 25-7.0 log(f/20)
-
CAT5E-SFTP-4P
LAN CABLE is suitable for data transmission on Local Area Network , especially for computer, video or perfect audio. Specifications 1. Wire Construction: Pair Wire Arrangement 1 P Blue ´ White / Blue Stripe 2 P Orange ´ White / Orange Stripe 3 P Green ´ White / Green Stripe 4 P Brown ´ White / Brown Stripe 2. Structure: Item Specification Conductor Material Annealed Copper Construction 1 / 0.54 mm Diameter 0.54 ± 0.005 mm Insulation Material HDPE Average Thickness 0.247 mm Diameter 1.03 ± 0.02 mm Twisted Refer to structure figure Assembly Arranged in accordance with the structure figure. Non-woven tape Approx. 0.2 mm in thick. Al - Mylar Approx. 0.06mm in thick. (with Al side out) Braid Shield Material Annealed Tinned Copper Construction 24 / 8 / 0.12 mm Jacket Material PVC or LSOH Average Thickness 0.6 mm Diameter 6.9 ± 0.2 mm Packing 305 m plywood drum in a box 3. Electrical Characteristics: Comply with TIA/EIA-568-B.2 Standard. Item Electrical Characteristics of Cable Impedance (1 – 100 MHz) 100 ± 15 Ω Conductor Resistance (20℃) 9.38 Ω Per 100 m (328 ft) Resistance Unbalance (20℃) Max. 5% Insulation Resistance (20℃) 1500MW - Km DC 500V (Between wire and ground) Dielectric strength DC 500V / 1min. or AC 350 V / 1min. Mutual Capacitance (1KHz) Max. 5.6 nF Per 100 m (328 ft) Capacitance unbalance (1KHz) 330 pF Per 100 m (328 ft) ( pair to ground) Delay Skew Max. 45 ns Per 100 m (328 ft) Frequency Insertion Loss (dB/100m) Max. Propagation Delay 0.772MHz 1.8 — 1 MHz 2.0 534 + 36/ √f (f：MHz) 4 MHz 4.1 8 MHz 5.8 10 MHz 6.5 16 MHz 8.2 20 MHz 9.3 25 MHz 10.4 31.25 MHz 11.7 62.5 MHz 17.0 100 MHz 22.0 Frequency NEXT (dB/100m) Min. PSNEXT (dB/100m) Min. ELFXT (dB/100m) Min. PSELFXT (dB/100m) Min. 0.772MHz 67.0 64.0 — — 1 MHz 65.3 62.3 63.8 60.8 4 MHz 56.3 53.3 51.7 48.7 8 MHz 51.8 48.8 45.7 42.7 10 MHz 50.3 47.3 43.8 40.8 16 MHz 47.3 44.4 39.7 36.7 20 MHz 45.8 42.8 37.7 34.7 25 MHz 44.3 41.3 35.8 32.8 31.25 MHz 42.9 39.9 33.9 30.9 62.5 MHz 36.4 35.4 27.8 24.6 100 MHz 35.3 32.3 23.8 20.8 Return Loss (dB/100m) 1≦ f ＜10MHz RL≧ 20+5.0 log(f) 10≦ f ＜20MHz RL≧ 25 20≦ f ＜100MHz RL≧ 25-7.0 log(f/20)
-
CAT5E-UTP-4P
LAN CABLE is suitable for data transmission on Local Area Network , especially for computer, video or perfect audio. Specifications1. Wire: Pair No. Color 1P Blue ´ White/Blue Stripe 2P Orange ´ White/Orange Stripe 3P Green ´ White/Green Stripe 4P Brown ´ White/Brown Stripe 2. Specification: Conductor Material Copper Wire Structure 1 / 0.515 ± 0.007 mm Diameter Approx. 0.515 mm Insulation Material HDPE Average Thickness 0.2 mm Diameter 0.915 ± 0.05 mm Twisted Four pairs Assembly Arranged in accordance with the structure figure. Jacket Material PVC or LSOH Average Thickness 0.5 mm Diameter 5.2 ± 0.2 mm 3. Electrical Characteristics: Comply with TIA/EIA-568-B.2 Standard. Item Electrical Characteristics of Cable Impedance ( 1 – 100 MHz) 100 ± 15 Ω Conductor Resistance (20℃) 9.38 Ω Per 100 m (328 ft) Resistance Unbalance (20℃) Max. 5% Insulation Resistance (20℃) 1500MW - Km DC 500V (Between wire and ground) Dielectric strength DC 500V / 1min. or AC 350 V / 1min. Mutual Capacitance (1KHz) Max. 5.6 nF Per 100 m (328 ft) Capacitance unbalance (1KHz) 330 pF Per 100 m (328 ft) ( pair to ground) Delay Skew Max. 45 ns Per 100 m (328 ft) Frequency Insertion Loss (dB/100m) Max. Propagation Delay 0.772MHz 1.8 — 1 MHz 2.0 534 + 36/ √f (f：MHz) 4 MHz 4.1 8 MHz 5.8 10 MHz 6.5 16 MHz 8.2 20 MHz 9.3 25 MHz 10.4 31.25 MHz 11.7 62.5 MHz 17.0 100 MHz 22.0 Frequency NEXT (dB/100m) Min. PSNEXT (dB/100m) Min. ELFXT (dB/100m) Min. PSELFXT (dB/100m) Min. 0.772MHz 67.0 64.0 — — 1 MHz 65.3 62.3 63.8 60.8 4 MHz 56.3 53.3 51.7 48.7 8 MHz 51.8 48.8 45.7 42.7 10 MHz 50.3 47.3 43.8 40.8 16 MHz 47.3 44.4 39.7 36.7 20 MHz 45.8 42.8 37.7 34.7 25 MHz 44.3 41.3 35.8 32.8 31.25 MHz 42.9 39.9 33.9 30.9 62.5 MHz 36.4 35.4 27.8 24.6 100 MHz 35.3 32.3 23.8 20.8 Return Loss (dB/100m) 1≦ f ＜10MHz RL≧ 20+5.0 log(f) 10≦ f ＜20MHz RL≧ 25 20≦ f ＜100MHz RL≧ 25-7.0 log(f/20) 4. Packing: 305 Meters / Reel (8 type) in a box.