sheet metal crimper
●Perfect Crimps for a tighter fitting, leakproof connections.●Non-Slip Vinyl Cushion Grips●All Steel Construction
相關產品
-
hole punch tool
use to punch additional slots in the cut edge of siding when the panel must be nailed or stapled as required.The elngated slot allows for normal expansion and contraction from temperayure changes. Siding will not buckle or crack at nail location, when nailed correctly to siding specifications.
-
hand seamer
Hand Seamer●3” jaws●Bends and flattens metal. Makes permanent, tight seams. De markings at 1/4” increments on of jaws●Non-Slip Vinyl Cushion Grips●All Steel Construction
-
hand notcher
HAND NOTCHERMakes a 30‘ “V” corner notch for hand fabricating rectangular metal duct.●13/16”Throat Depth●All Steel Construction●Forged Cutting Jaw●Non-Slip Vinyl Cushion Grips
-
duct stretcher
With one hand hold the duct in place using the Duct Stretcher. The other hand is free for slipping the drive cleat in place. If the side of the duct is close to a wall or other obstruction, the wheels can be changed to the opposite side of the Duct Stretcher.
-
folding tool
ONE TOOL HAS FOLDING SEAMS FOR BOTH 3/8” AND 1”DEPTHS.●1”FlangesFor joist panning,fitting plenums, register boots and trunk line end caps.●3/8”FlangesTo make folds for C-drives.●Sight holes assure alignment.●Cpable of bending up to 24 gauge steel.
