KLISON 超優引擎機油 CJ4
克力森超優CJ4引擎機油
KLISON SUPER ENGINE OIL CJ4
產品說明
克力森超優 CJ4機油是複級柴油引擎合成潤滑油,特別推薦為最新型第四.五期環保柴油引擎最高使用標準,可滿足嚴重作業之渦輪及機械增壓式引擎的潤滑需求。
克力森超優 CJ4機油採用低硫合成基礎油與最新添加劑掺配而成,品質不僅符合美日等大客.貨車製造廠商要求,亦符合歐洲車輛製造廠延長換油週期要求,同時具有低灰份,適用於加裝DPF且使用低硫柴油之新型柴油引擎使用。
優點 /用途
能減少機油耗量及節省燃料。
具低灰份,為最新環保型機油。
可延長換油週期,降低成本。
通過美國石油協會API認證及符合規範等級標準:
•API CJ4/SN,License No.3023
•Caterpillar ECF-2,-3,1A
•Mack EO-O PP07
•MAN 3275
•Mercedes-Benz 228.31
•ACEA E9-08,ACEA E7-08
•RVI RDL-3
•Detroit 93K218,215
•Cummins CES 20071and CES20081
•VOLVO VDS 4
典型物性
檢 驗 項 目
测量方法
测量结果
SAE 粘度等级
SAE J 300
15W/40
比重 @ 15 ºC
ASTM D 4052
0.8724
閃點（開口杯）, ºC
ASTM D 92
225
傾點 , ºC
ASTM D 97
-30
動粘度 @ 40ºC (cSt)
ASTM D 445
114.97
@ 100ºC (cSt)
ASTM D 445
15.365
粘度指数
ASTM D 2270
140
總鹼價TBN mgKOH/g
ASTM D 2896
8.5
硫酸鹽灰份,Wt%
ASTM D 874
0.98
硫含量,Wt%
ASTM D 2622
0.33
磷含量,Wt%
ICP-AES
0.10
色度
ASTM D 1500
3.5
*本公司保留修訂產品一般特性的權利.讓顧客享受最新指令要求之權益*2018.12
KLISON SUPERFLEET ENGINE OIL CJ4
KLISON SUPERFLEET ENGINE OIL CJ4 is a multigrade synthetic oil specially recommendate for 4th & 5th environmental friendly diesel engine. Which satisfy the demand of lubricity of high duty turbo charged and supercharged diesel engine.
KLISON SUPERFLEET ENGINE OIL CJ4 is blended from low sulfur synthetic base oils and formulated with the latest additives. The oils do not only meet the requirements for bus vans manufacturers in USA, Japan and other countries, but also meet the requirements of long oil change intervals for bus vans manufacturers in European. KLISON SUPERFLEET ENGINE OIL CJ4 content low ash are widely used in modern diesel engines equipped with DPF which need low sulfur diesel fuel.
Benefits / Applications
Reduce oils consumption and save diesel fuel.
Low ash, as a modern environmental friendly oil.
Extend oil change intervals to reduce cost.
API Certificated, Specification & Recommendation
•API CJ4/SN,License No.3023
•Caterpillar ECF-2,-3,1A
•Mack EO-O PP07
•MAN 3275
•Mercedes-Benz 228.31
•ACEA E9-08,ACEA E7-08
•RVI RDL-3
•Detroit 93K218,215
•Cummins CES 20071and CES20081
•VOLVO VDS 4
Typical Characteristics:
TEST DESCRIPTION
METHOD
TYPICAL RESULTS
SAE Viscosity Grade
SAE J 300
15W/40
Specific Gravity@ 150C
ASTM D 4052
0.8724
Flash Point, 0C
ASTM D 92
225
Pour Point , 0C
ASTM D 97
-30
Kinematics Viscosity
@ 400C (cSt)
ASTM D 445
114.97
@ 1000C (cSt)
ASTM D 445
15.365
Viscosity Index
ASTM D 2270
140
TBN mgKOH/g
ASTM D 2896
8.5
Sulfated Ash,Wt%
ASTM D 874
0.98
Sulfur Content,Wt%
ASTM D 2622
0.33
Phosphorus Content,Wt%
ICP-AES
0.10
Colous
ASTM D 1500
3.5
*We remain the right to modify this specification to satisfy request of the clients for the evolution of the newest science & technology.
相關產品
-
KLISON 超優引擎機油 CK4&FA4
克力森超優CK4&FA4引擎機油 KLISON SUPER ENGINE OIL CK4&FA4 產品說明 克力森超優 CK4&FA4機油是複級柴油引擎合成潤滑油,是先進的重負荷CK4及FA4柴油引擎機油,特別針對最新的分類PC-11而研發。新的分類被細分為兩個不同類別標準,一個是保留原重負荷的要求標準,另一個提供現代柴油科技特別的燃料效能及節省燃油的優點,同時維持耐久力。 克力森超優CK4&FA4機油強化了引擎績效包括氧化穩定性,剪切穩定性及溫室氣體GHG的排放穩定。 克力森超優CK4&FA4機油不但符合API標準,且針對符合最先進引擎製造廠所需求等級及基礎油而研發,包括: Caterpillar,Cummins,Detroit Diesel,Mack,Renauit,Volvo,Mercedes-Benz,MAN,Ford。 克力森超優CK4&FA4機油自我要求符合歐洲汽車製造商協會ACEA E9標準。 優點 /用途 •更進步的保護引擎及最少的耗油。 •滿足最現代柴油引擎車廠之需求。 •氫化基礎油,保持溫度穩定及抗氧化等特性。 •特別適合最新柴油引擎。 •提供最優越燃油消耗,亦降低減少溫室氣體GHG的排放。 通過美國石油協會API認證及符合規範等級標準: •API CK-4 in SAE 15W40 & SAE10W30, License No.3023 •API CJ-4/CI-4+/CI-4/CH-4 •API SN/SM/SL/SJ •API FA4 in SAE 10W30 , License No.3023 •ACEA E9-12, E7-12 •Caterpillar ECF-3 •Mack EOS-O4.5,EO-O+ •Daimler MB 228.31 •MAN 3575,M 3275 •JASO DH-2 •Cummins 20081and 20086,20087 •VOLVO VDS-4.5,VDS-4 •MTU CATEGORY 2.1 •Renault RLD-4,RLD-3 •DEUTZ DQC III-10LA •DFS 93K222.223DFS 93K218 •FORD WSS-W2C171-E,WSS-W2C171-F 典型物性 檢驗項目 测量方法 测量结果 SAE 粘度等级 SAE J 300 10W/30 10W/30 15W/40 比重 @ 15 ºC ASTM D 4052 0.879 0.881 0.8724 閃點（開口杯）, ºC ASTM D 92 225 225 232 傾點 , ºC ASTM D 97 -27 -27 -24 動粘度 @ 40ºC (cSt) ASTM D 445 65.8 82.7 111.0 @ 100ºC (cSt) ASTM D 445 9.82 11.8 14.7 粘度指数 ASTM D 2270 132 135 136 總鹼價TBN mgKOH/g ASTM D 2896 9.8 9.8 9.8 API FA-4 CK-4,CJ-4 CK-4,CJ-4 色度 ASTM D 1500 <4.0 *本公司保留修訂產品一般特性的權利.讓顧客享受最新指令要求之權益* KLISON SUPERFLEET ENGINE OIL CK4&FA4 Product Description : KLISON SUPERFLEET ENGINE OIL CK4&FA4 is a multi-grade of synthetic oils for modern heavy duty diesel engine. The oils are specially blended to meet new proposed category pc-11 specifications. A new category be split into two separate and distinct subcategories. One preserves its historical heavy-duty oil criteria, another provides additional fuel efficiency and economy benefits, oxidation stability, shear stability for modern diesel engine technology while maintaining durability. KLISON SUPERFLEET ENGINE OIL CK4&FA4 meet API service grade and also meets the latest original equipment manufacturers performance specifications in grades and base stocks in which caterpillar , Cummins, Detroit Diesel, Mack, Renault, Volvo, Mercedes-Benz, MAN, Ford included. KLISON SUPERFLEET ENGINE OIL CK4&FA4 is manufactured by self-certifying to meet grade requirements of ACEA E9. Benefits / Applications : •Further Protect engines and minimize oil consumption. •Satisfying modern diesel engine OEMs oil demand. •Hydro-treated base, inherent thermal-stability and anti-oxidation property. •Provide better fuel economy, and reduce GHG emissions. API Certificated, Specification & Recommendation •API CK-4 in SAE 15W40 & SAE10W30, License No.3023 •API CJ-4/CI-4+/CI-4/CH-4 •API SN/SM/SL/SJ •API FA4 in SAE 10W30 , License No.3023 •ACEA E9-12, E7-12 •Caterpillar ECF-3 •Mack EOS-O4.5,EO-O+ •Daimler MB 228.31 •MAN 3575,M 3275 •JASO DH-2 •Cummins 20081and 20086,20087 •VOLVO VDS-4.5,VDS-4 •MTU CATEGORY 2.1 •Renault RLD-4,RLD-3 •DEUTZ DQC III-10LA •DFS 93K222.223DFS 93K218 •FORD WSS-W2C171-E,WSS-W2C171-F Typical Characteristics: TEST DESCRIPTION METHOD TYPICAL RESULTS SAE Viscosity Grade SAE J 300 10W/30 10W/30 15W/40 Specific Gravity@ 150C ASTM D 4052 0.879 0.881 0.8724 Flash Point, 0C ASTM D 92 225 225 232 Pour Point , 0C ASTM D 97 -27 -27 -24 Kinematics Viscosity @ 400C (cSt) ASTM D 445 65.8 82.7 111.0 @ 1000C (cSt) ASTM D 445 9.82 11.8 14.7 Viscosity Index ASTM D 2270 132 135 136 TBN mgKOH/g ASTM D 2896 9.8 9.8 9.8 API Service classification FA-4 CK-4,CJ-4 CK-4,CJ-4 Colour ASTM D 1500 <4.0 *We remain the right to modify this specification to satisfy request of the clients for the evolution the newest science & technology.
-
KLISON 超優全合成引擎機油EURO CJ4
克力森超優EURO CJ4 全合成引擎機油 KLISON SUPER ENGINE OIL EURO CJ4 產品說明 克力森超優EURO CJ4全合成機油是一種超高性能低灰淨柴油引擎(UHPD)機油,達到ACEA E6,E7,E9和MB Approval 228.51要求標準,它是由精選的全合成基礎油與高科技核心添加劑,以先進調配技術調配而成,可滿足嚴重作業之渦輪及機械增壓式引擎的潤滑需求。 克力森超優 EURO CJ4全合成機油具有超強的抗氧化性能,為引擎提供特別的高溫防護,具有更低的廢氣排放,比常規機油更長的使用壽命,節省燃油。 克力森超優 EURO CJ4全合成機油在極嚴苛的操作條件下,也完全達到EURO V和VI排放要求。特別適合用於使用低硫柴油(小於50ppm) ,裝有氮化物減少系統和微粒過濾器的柴油引擎。 優點 /用途 特別設計用於裝有微粒過濾器或各種廢氣循環裝置的最先進柴油引擎。 滿足大多數引擎製造商的要求。 具有超長的換油週期,為超長效機油。 特別適用於對排放有嚴格要求的 EURO V和VI最新柴油引擎。 通過美國石油協會API認證及符合規範等級標準: •API CJ4/SN,License No.3023 •VOLVO VDS-4,VDS-3 •MB-Approval228.51, 228.31 •Detroit 93K218 •ACEA E4-12,E6-12,E7-12,E9-12 •Mack EO-O Premium Plus •MAN M3477,M3575,M3271-1 •Mack EO-N Premium Plus •MTU Category 3.1,Category 2.1 •Caterpillar ECF-3 •Scania Low Ash/LA-2(Field trial running) •Cummins CES20081 •Renault RLD-3,RLD-2 •Deutz DQC IV-10LA,DQC-III-10LA •JASO DH-2 典型物性 测量方法 测量结果 SAE 粘度等级 SAE J 300 10W/40 比重 @ 15 ºC ASTM D 4052 0.871 閃點（開口杯）, ºC ASTM D 92 228 傾點 , ºC ASTM D 97 -36 動粘度 @ 40ºC (cSt) ASTM D 445 93.3 @ 100ºC (cSt) ASTM D 445 14.2 粘度指数 ASTM D 2270 157 總鹼價TBN mgKOH/g ASTM D 2896 12.8 色度 ASTM D 1500 <4.5 *本公司保留修訂產品一般特性的權利.讓顧客享受最新指令要求之權益*2018.11
-
KLISON 多效滑脂MP- 2&3
克力森多效潤滑脂 KLISON MULTI-PURPOSE GREASE 產品說明 Klison Multi-Purpose Grease 多效潤滑脂.含有多種功能添加劑及防腐劑.適合於在重負荷.沖擊載荷下機械.如汽車.建築.採礦.船舶等工業機械使用.使用溫度範圍-15 0C - 145 0C. 優點/用途 •優越的防腐蝕抗鏽表現. •在重負荷.沖擊負荷可降低摩耗. •邦浦輸送性良好. •有效防止水沖刷. •在潮濕環境下能延長使用壽命. 典型物性 TEST DESCRIPTION METHOD TYPICAL RESULTS NLGI Grade # 2 # 3 增稠劑類型 Lithium Lithium 顏色 Light Yellow Light Yellow 紋理 Smooth Smooth 滴點, 0C ASTM D-2265 180 185 針入度 @ 250C ASTM D-217 265 - 295 220 - 250 基礎油粘度 at 400C Cst ASTM D-445 >120 >120 水沖刷試驗 ASTM D-1264 PASS PASS 防腐蝕試驗 ASTM D-1743 PASS PASS 技術規格 Meets NLGI *本公司保留修訂產品一般特性的權利.讓顧客享受最新指令要求之*2018.12 KLISON MULTI-PURPOSE GREASE Product description : Klison Multi-Purpose Grease is an advances grease with multi-function additive and anticorrosion agent. Klison Multi-Purpose Grease is suitable for using under heavy-loading or shock-loading conditions commonly found in automotive, construction, mining and marine industries with wide range of applications. Operating temperature can be as -15 0C and as high as 145 0C. Benefits / Applications : •Excellent anti-rust and anti-corrosion properties. •Dramatically reduces wear under high loading or shock loading. •Good pumpability in centralized systems. •resistance to water washout . •Extended life in wet environments. Typical Characteristics: TEST DESCRIPTION METHOD TYPICAL RESULTS NLGI Grade # 2 # 3 Thickener Type Lithium Lithium Colour Light Yellow Light Yellow Texture Smooth Smooth Dropping Point, 0C ASTM D-2265 180 185 Worked Penetration @ 250C ASTM D-217 265 - 295 220 - 250 Viscosity Base Oil at 400C Cst ASTM D-445 >120 >120 Water Wash-out ASTM D-1264 PASS PASS Rust and Corrosion Test ASTM D-1743 PASS PASS Performance Standards: Meets NLGI *We remain the right to modify this specification to satisfy request of the clients for the evolution of the newest science & technology.
-
KLISON 高溫奈米滑脂
克力森高溫奈米滑脂 KLISON HI –TEMP NANO GREASE •Premium rolling-contact bearing grease. •Supenior lubrication under heavy or shock loading. •Muti-purpose applications,including sealed-for-live bearings. •Long live,high temperature,salt water rust inhibited. •最高級滾動式軸承滑脂。 •耐重負荷與耐震動負荷。 •多效用途,包括永不換油式軸承。 •長壽,耐高溫,含耐鹽水防鏽劑。 克力森高溫奈米滑脂系複合鋰皂基含高單位的奈米MT1滑脂,具有抗氧化抗高溫,耐壓減磨之特性,在設計上操作溫度下,可長期使用,並適合機件在,高溫及嚴重的震動作業下潤滑。 克力森高溫奈米滑脂不但具有超強的潤滑界面親和性,奈米MT1更能在金屬面毛細孔產生結構性結合,達到抗磨.抗高溫.抗腐蝕,有效的抑制金屬表面異常的磨損,及滑動面所產生的異常聲音,其優良的減磨特性,對於微動及震動的軸承特別有效,在任何機件潤滑工作上都能有效的降低摩擦係數與防止磨損。 克力森高溫奈米滑脂在高溫150℃使用時能有優越的效果,其潤滑年限,較一般滑脂要長,本滑脂雖然滴點高達300℃及超溫下有優越的抗氧化及抗軟化性能,然溫度增加總會影響到氧化率及熱變質性,往往在溫度越高時,即需經常更換滑脂,例如溫度在200℃下使用不超過一星期為佳,如溫度接近250℃應每日補充滑脂。 specification nlgi grade no. 2 color AMBER soap type lithium complex dropping point ℃ >300 mineral oil viscosity cst 100℃ >15 COPPER CORROSION100℃,24HRS 1A WATER RESISTANCE % <3.3 NANO MT-1,% 5 *本公司保留修訂產品一般特性的權利.讓顧客享受最新指令要求之權益*
-
KLISON 高溫複合鋰基極壓 EP 0-1
克力森高溫複合鋰基極壓潤滑脂 KLISON LITHIUM COMPLEX EP GREASE Lithium Complex EP Grease 是一種優質的高溫複合鋰基極壓潤滑脂.Lithium Complex EP Grease 能在高低溫.高負荷.震蕩負載具有震動的情況下很好的保護汽車業.工業.建築業和礦業.船舶業中各種軸承件.適用溫度可高達2450C. 優點/用途 •適用溫度高達2450C. •能在各種軸承轉速下使用. •超強的防腐蝕與抗鏽能力. •在高負荷.震蕩負荷及震動的情況下保護機件免於摩耗. •防水沖刷及乳化能力優異. •在潮濕環境下延長使用壽命. 典型物性 測試項目 測試方法 測 試 結 果 NLGI Grade # 0 # 1 增稠劑類型 Lithium Complex Lithium Complex 顏色 Dark Green Dark Green 紋理 Smooth Smooth 滴點, 0C ASTM D-2265 270 290 針入度 @ 250C ASTM D-217 355-385 310-340 負載Timken ok load, PSI ASTM D-2509 40-45 45-50 水沖刷試驗 ASTM D-1264 PASS PASS 防腐蝕試驗 ASTM D-1743 PASS PASS 技術規格 Meets U.K Timken Standard. *本公司保留修訂產品一般特性的權利.讓顧客享受最新指令要求之權利* KLISON LITHIUM COMPLEX EP GREASE Product description : Lithium Complex EP Grease is premium lithium complex, extreme pressure, high-temperature grease. It is suitable for high load, shock load and vibration applications in variety of automotive, industrial, construction, mining and marine applications. It has excellent performance properties at both high and low temperatures. It is particularly suited for applications such as bearings and ball and steering joints where moisture or condensation excellent performance properties at both high and low temperatures. Benefits / Applications : •Provide a high dropping point •Suitable for wide range of bearing speed. •Extra protection against rust and corrosion. •Reduced wear under heavy or shock load and vibrations. •Excellent resistance to water washout and contamination. •Extended life in wet environments. Typical Characteristics: TEST DESCRIPTION METHOD TYPICAL RESULTS NLGI Grade # 0 # 1 Thickener Type Lithium Complex Lithium Complex Colour Dark Green Dark Green Texture Smooth Smooth Dropping Point, 0C ASTM D-2265 270 290 Worked Penetration @ 250C ASTM D-217 355-385 310-340 Timken ok load, PSI ASTM D-2509 40-45 45-50 Water Wash-out ASTM D-1264 PASS PASS Rust and Corrosion Test ASTM D-1743 PASS PASS Performance Standards: Meets U.K Timken Standard. *We remain the right to modify this specification to satisfy request of the clients for the evolution of the newest science & technology.